Turntable hpe servo motor hte hkang lu ai.Cilinder langai sha hkrang hte linear lam madun ai injection unit hpe lang ai.Injection unit a frame hta shara nga ai unit kaji (sh) screw kadun hpe bang mai ai.
Modular design,injection unit hpe galai shai mai ai.Mahtai hte hkrak ai lam hta grai kaja ai hkang zing ai ladat.
LAM NI
| PARAMETER | LANGAI | HMDP160 | |||
| Mungkan ting galu kaba ai masat masa | -- | 300 | 300 | ||
| TSI HPAWNG UNIT | A | B | A | B | |
| Katsi htu ai n-gun (theory) | cm3 | 93 | 108 | 124 | 141 |
| Katsi htu ai n-gun (PS) | g | 85 | 98 | 113 | 128 |
| oz | 3 | 3.5 | 4 | 4.5 | |
| Katsi htu ai n-gun | g/s | 55 | 63 | 73 | 83 |
| Screw galu | mm | 26 | 28 | 30 | 32 |
| Katsi htu ai n-gun | MPa | 342 | 295 | 257 | 226 |
| Screw L/D shadawn shadang | -- | 23 | 21.4 | 22.6 | 21.2 |
| Screw n-gun | mm | 175 | 175 | 175 | 175 |
| Screw lawan ai (lagaw lahkam n nga ai) | minit | 0-244 | |||
| CHYUM AI UNIT | |||||
| Clamping n-gun | kN | 1600 | |||
| Mold hpaw ai stroke | mm | 340 | |||
| Platen kaba ai | mm×mm | 960×680 | |||
| Rotary shat sha ku a galu kaba ai | mm | 800 | |||
| Tie bars lapran na tsan gang ai(H×V) | mm×mm | 710×440 | |||
| Max.shani nhtoi | mm | 800 | |||
| Mold n-gun (Min-Max) | mm | 160-460 | |||
| Ejector n-gun | mm | 140 | |||
| Ejector n-gun | kN | 38×2 | |||
| Barrel lapran na tsan gang ai lam | mm | 420 | |||
| N-gun UNIT | |||||
| Hka htung n-gun | MPa | 17.5 | |||
| Pump mawdaw n-gun | kW | 18.7 | |||
| Katsi ai n-gun | kW | 6.8 | |||
| Temp hpe hkang ai ginra jahpan | -- | 4×2 | |||
| KAGA NI | |||||
| Sau tank a n-gun | L | 330 | |||
| Mashin shadawn shadang (L×W×H) | m×m×m | 5.2×1.76×2.1 | |||
| Mashin n-gun | Ton | 7.1 | |||
TSI HPAWNG UNIT
Injection unit hte lahkawng lang garan ai barrel set,injection on fly, lahkawng lang nsam hte langai lang gap ai arung arai ni,cycle aten hpe shayawm na matu.Single cylinder injection structure, injection galaw na matu grau hkrak ai.
Lahkawng lang tup hkrak ai linear sin langa, hkrak ai hte lawan ai starter hte kap bra ai jak hpe madi shadaw ya ai set ting.
Injection unit gaw size n bung ai, n bung ai nsam lahkawng rawng ai arung arai ni hte htuk manu ai.
PID hte nbung katsi ai hpe hkang ai barrel.
HKA LAM UNIT
Hka htung ni gaw, valve hte hose hpe lang ai.
DIN madang masat da ai cone hte shinggrup da ai shingnip shingna hte hpawng de da ai, G sumri shinggrup da ai gland hte manifold hpe hpaw da ai.
HKANG SHAGA AI LAM
Hpa majaw nga yang, n-gun ja ai KEBA controller,LCD kaba hte masha -machine hte htuk manu ai interface ni hpe lang da ai.Buzzer hte nhtoi htoi ai alarm masum hpe lang da ai.
Hot Tags: nsam lahkawng rawng ai tsi htu ai jak, Miwa mung lahkawng nsam rawng ai tsi htu ai jak galaw shapraw ai ni, dut ya ai ni, jak rung
